Comments on: Keg Lager is dispensing slow

By: morepour

morepour — Tue, 17 Jan 2012 12:14:17 +0000

As the flow controllers under the bar start to get blocked up with yeast the flow rate can begin to slow down. If you know how to try opening and closing the flow control to break the build up. Its best to do this whilst the line is in water after a line clean because it can dislodge a lot of muck.

Hope this helps

By: Boz

Boz — Thu, 30 Dec 2010 11:42:24 +0000

The flow rate needs increasing. Give Tech Services a call it is a simple adjustment.

By: peter

peter — Thu, 30 Dec 2010 07:40:52 +0000

at my pub we have t bars. on one of the kronenbourg taps one pours out realy slowly and the other pours out fine(when the line has been cleand of course). all the other keg taps pou out fine so why does this one tap pour so slowly?

By: admin

admin — Sat, 12 Jun 2010 13:05:54 +0000

Unless your technician has shown you how to do it, it is a bit difficult to explain. I’m sure you can call him back out over the weekend if its urgent.

By: Tomoparol

Tomoparol — Sat, 12 Jun 2010 10:44:22 +0000

Hi last week a technician came out to look at a pump where I work. He asked wot was wrong and I said the carling pump is really slow to pull. So he adjusted something underneath the pump and it now comes out faster. Only problem is that it’s fobbing a lot so I’m wanting to turn it back down. He can’t come back out until Monday, so how can I do it myself. Cheers

By: flat-head

flat-head — Wed, 06 Jan 2010 11:58:22 +0000

might need draining off
http://www.inndoctor.co.uk/cooling/my-keg-beer-undercounter-cooler-is-leaking/
Make sure the remotes are topped up with glycol (tank on the front) with this lovely weather we are having.

By: steve lloyd

steve lloyd — Mon, 04 Jan 2010 17:08:15 +0000

do coolers need priming or bleeding