My keg lager is losing its head

By

flat-lager

Drink it quick……Well, as long as you don’t lose yours [head that is] you may be able to solve this problem yourself, quite easily.

The main reason for poor head retention, as we in the Trade call it, is usually dirty glasses. Now I know what you are saying,” I Bloody well clean my glasses properly”.

The thing is, there is cleaning your glasses and “cleaning your glasses”. Before we talk about glass cleaning in detail, lets talk about why it is so important to do it properly. Ask yourself how many times does a single glass get used every day. Well if you are doing a good trade the answer may be very many.

Glasses retain grease from people’s mouths, from lipstick and even from some drinks, which are served in them. Always remember this, Grease and Beer do not go well together. So it is important to ensure there is absolutely no grease or other contaminates in your glasses.

The other obvious reason we must clean glasses thoroughly is to prevent germs being passed on to other people.

So here we go:

  • Make sure your glass washer is cleaned regularly every day.
  • Have your glass washer serviced at regular intervals. See makers guide lines.
  • Make sure the correct cleaning and rinse aid products are being used, and are always full.
  • Do not use the glass washer for anything else other than glasses. Sorry! No coffee cups, ashtrays. Dinner plates.
  • Replace damaged or scratched glasses. They are not that expensive.
  • Never polish glasses. Jack Duckworth might do it, but you shouldn’t do it in the real world.
  • Always stack your glasses on proper stacking mats.

If the head on your beer is still poor, contact your local Tech Services.

This entry was posted by on Sunday, January 18th, 2009 at 3:18 pm and has . It is filed under Dispense, Fault Finding, Hygiene and has these tags: , , , . You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
Email This Post Email This Post

Rate this article by clicking a star.
1 Star2 Stars3 Stars4 Stars5 Stars (3 votes, average: 5.00 out of 5)
Loading ... Loading ...

Related posts:

  1. Keg Lager is dispensing slow
  2. My keg Lager is fobbing.
  3. Test your beer glasses
  4. Glass Care
  5. Do you need Renovating?
Get a free Giffgaff Sim

 

2 Responses to “ My keg lager is losing its head ”

  1. Ged on July 1, 2009 at 4:44 pm

    You haven’t mentioned about lager being too cold. I drink Carling and even if it is served very cold it still bubbles up great. The same pub sells Carlsberg and that just looks flat .No bubbles.Is it to cold or what.

  2. Ken Nason on January 26, 2012 at 7:51 pm

    If it is a constant problem then get tech services to check that the correct gas pressure is set on the product valve. Too low a pressure will mean that the product will not absorb the correct amount of gas and be flat. Sometimes having them increase the length of the reducing pipe(very narrow guage to the pump) to the pump can up the gas agitation and the head.

Leave a Reply