There isn’t any keg beer coming out of the tap

January 13, 2009
By admin

beer taps

In the cellar, check the plastic see through fob detector , directly above the keg on the wall, is full of beer. If it is empty of beer, then the keg in use is empty. Change on to a new keg.

Make sure that the gas to the keg is switched on, usually there is a gas valve.

Check full gas bottles are connected to the gas system and that they are turned on.

If there is a gas pump fitted, these are usually small black box type units on the wall, make sure the gas supply to them is switched on.

If there are electric pumps on the system make sure they are switched on and the prime button has been pressed.

Check the tap, make sure the sparklers or diffusers are clean and free from contamination.

If beer is still not serving contact your local Tech Services

This entry was posted by admin on Tuesday, January 13th, 2009 at 2:02 pm and has . It is filed under Dispense, Fault Finding and has these tags: . You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
Email This Post Email This Post

Rate this article by clicking a star.
1 Star2 Stars3 Stars4 Stars5 Stars (5 votes, average: 4.60 out of 5)
Loading ... Loading ...

Related posts:

  1. Water is coming out of the keg beer remote cooler
  2. My beer tap bar lighting isn’t working
  3. Do I have a Gas Leak on my keg beer system?
  4. Electric pump is running on
  5. My keg Lager is fobbing.
  6. Keg Lager is dispensing slow
  7. How to use the fob detector/Cellarbuoy
  8. Yeast trap on the bar

 

Leave a Reply