 |
borrow money online secured loans click here buy to let mortgage |
 |
Water is coming out of the remote cooler
- Looking at the remote cooler, firstly see if you can see where the water is coming from. If it is leaking generally from the bottom of the machine, you need to send for your local technician.
- If however you see the water is running out of a tube, which is situated, on one of the sides of the machine near the top, then this is perfectly normal. This water is meant to escape from the machine as overflow, due to the continual cycling of the ice within the unit. This overflow will happen only now and again. Do not attempt to block this overflow pipe. Also some small amounts of water on or around the top of the remote can be expected, and is the result of condensation on the python. If in doubt it is always best to send for your local technician.
Important
When using the Inn Doctor site it is important that all relevant Brewery Technical Services regulations and advice and Health and Safety regulations are adhered to. The advice we give does not ask you to interfere, adjust, or in any way tamper with beer dispense or ancillary equipment. Inn Doctor is a means of systematically checking your beer dispense equipment for faults, in accordance with recognised procedures, issued by the major Breweries. You must seek professional advice in relation to any area covered by this website in respect of which you have any doubts whatsoever.
Do not tamper with beer dispense equipment. please read our Disclaimer
