My beer tap bar lighting isn’t working

lighting_transformer4

Beer dispensers look at their best when lit up.If you find your bar lights are not working you should check the following.

  • Locate the lighting transformers which power the bar lights.These are usually mounted below the bar shelves near to a power outlet
  • Make sure the transformer is switched on at the socket.Quite often people use these sockets for other things and will leave the lighting transformer disconnected.
  • If the power is on, make sure the on off switch, which is mounted on the lighting transformer (this is often missed), is switched to the on position.
  • If your lights are still not working you need to send for your local technician.

  2 comments for “My beer tap bar lighting isn’t working

  1. 17th January 2012 at 12:20 pm

    A lot of the time with these bar transformers its the fuse. Maplin’s sell replacement fuses to fit these transformers for about £3 per box

  2. des
    23rd November 2014 at 10:20 am

    how do I wire the pump up which wire goes where thanks

Do you have a better answer? Leave a reply or an opinion