If you suspect you may have a small gas leak, try the following .If you have cellar cooling, which is very noisy, switch it off. Make sure there are no keg couplers or gas pumps switched on that are not in use. If you have been cleaning ensure the cleaning Gas pump is switched off and that any, that are connected to the cleaning main have their gases turned off.

Listen for any hissing sounds. Start at the gas cylinders. Make sure the gas bottle connections are tight. If they are tight and you can hear or feel gas escaping, it may be the seals on the connections are worn or lost. If you have been instructed by Tech Services on how to change these washers replace them. If not call out Tech Services.

	PROTECT YOUR FAMILY GET QUOTE Best Deal Mortgage Quote UK Quotes UK Quotes

Next, make sure that the keg couplers are fitted correctly to the kegs. Once again listen out for hissing. Make sure all gas fittings on couplers are in good condition and tight .If they are and you can still feel or hear gas escaping you may have a faulty keg. If the keg is leaking gas, change to a new one and inform your Tech services.

Finally when changing a gas cylinder, make sure it is full. Quite often you can replace an empty cylinder with another empty one.

To check on gas usage, another good tip is to write in chalk on the gas bottle the day it was put on service. That way you can keep track. Finally, remember do not tamper with any equipment, if you suspect something is damaged or not working, call your local Technical Services.

Do not forget to switch the cellar cooling back on.

Related posts:

1. There isn’t any keg beer coming out of the tap
2. My keg beer undercounter cooler is leaking.
3. My keg Lager is fobbing.