Electric pump is running on


  • Is the Electric pump switched on and primed. To prime press the prime button on the electric box above the pump, the motor should run and shut off, there should be a small light that will indicate this.
  • Is the gas turned on to the keg coupler? (Perhaps it hasn’t been switched back on after cleaning the lines).Gas is needed to push the beer from the container to the pump, if this isn’t happening the pump will not prime and continue running. This will also cause fobbing problems.
  • Make sure the keg in use is full and the keg coupler is fully depressed.
  • If the motor still runs on contact your local Technical Services.

Do you have a better answer? Leave a reply or an opinion